4.14 Database

SWI-Prolog offers several ways to store data in globally accessible memory, i.e., outside the Prolog stacks. Data stored this way notably does not change on backtracking. Typically it is a bad idea to use any of the predicates in this section for realising global variables that can be assigned to. Typically, first consider representing data processed by your program as terms passed around as predicate arguments. If you need to reason over multiple solutions to a goal, consider findall/3, aggregate/3 and related predicates.

Nevertheless, there are scenarios where storing data outside the Prolog stacks is a good option. Below are the main options for storing data:

Using dynamic predicates

Dynamic predicates are predicates for which the list of clauses is modified at runtime using asserta/1, assertz/1, retract/1 or retractall/1. Following the ISO standard, predicates that are modified this way need to be declared using the dynamic/1 directive. These facilities are defined by the ISO standard and widely supported. The mechanism is often considered slow in the literature. Performance depends on the Prolog implementation. In SWI-Prolog, querying dynamic predicates has the same performance as static ones. The manipulation predicates are fast. Using retract/1 or retractall/1 on a predicate registers the predicate as `dirty'. Dirty predicates are cleaned by garbage_collect_clauses/0, which is normally automatically invoked. Some workloads may result in significant performance reduction due to skipping retracted clauses and/or clause garbage collection.

Dynamic predicates can be wrapped using library library(persistency) to maintain a backup of the data on disk. Dynamic predicates come in two flavours, shared between threads and local to each thread. The latter version is created using the directive thread_local/1.

The recorded database

The `recorded database' registers a list of terms with a key, an atom or compound term. The list is managed using recorda/3, recordz/3 and erase/1. It is queried using recorded/3. The recorded database is not part of the ISO standard but fairly widely supported, notably in implementations building on the `Edinburgh tradition'. There are few reasons to use this database in SWI-Prolog due to the good performance of dynamic predicates. Advantages are (1) the handle provides a direct reference to a term, (2) cyclic terms can be stored and (3) attributes (section 7.1) are preserved. Disadvantages are (1) the terms in a list associated with a key are not indexed, (2) the poorly specified immediate update semantics (see section 4.14.5 applies to the recorded database and (3) reduced portability.

The flag/3 predicate

The predicate flag/3 associates one simple value (number or atom) with a key (atom, integer or compound). It is an old SWI-Prolog specific predicate that should be considered deprecated, although there is no plan to remove it.

Using global variables

The predicates b_setval/2 and nb_setval/2 associate a term living on the Prolog stack with a name, either backtrackable or non-backtrackable. Backtrackable and non-backtrackable assignment without using a global name can be realised with setarg/3 and nb_setarg/3. Notably the latter are used to realise aggregation as e.g., aggregate_all/3 performs.

Tries

As of version 7.3.21, SWI-Prolog provides tries (prefix trees) to associate a term variant with a value. Tries have been introduced to support tabling and are described in section 4.14.4.

4.14.1 Managing (dynamic) predicates

[ISO]abolish(:PredicateIndicator)

Removes all clauses of a predicate with functor Functor and arity Arity from the database. All predicate attributes (dynamic, multifile, index, etc.) are reset to their defaults. Abolishing an imported predicate only removes the import link; the predicate will keep its old definition in its definition module.

According to the ISO standard, abolish/1 can only be applied to dynamic procedures. This is odd, as for dealing with dynamic procedures there is already retract/1 and retractall/1. The abolish/1 predicate was introduced in DEC-10 Prolog precisely for dealing with static procedures. In SWI-Prolog, abolish/1 works on static procedures, unless the Prolog flag iso is set to true.

It is advised to use retractall/1 for erasing all clauses of a dynamic predicate.

abolish(+Name, +Arity)

Same as abolish(Name/Arity). The predicate abolish/2 conforms to the Edinburgh standard, while abolish/1 is ISO compliant.

copy_predicate_clauses(:From, :To)

Copy all clauses of predicate From to To. The predicate To must be dynamic or undefined. If To is undefined, it is created as a dynamic predicate holding a copy of the clauses of From. If To is a dynamic predicate, the clauses of From are added (as in assertz/1) to the clauses of To. To and From must have the same arity. Acts as if defined by the program below, but at a much better performance by avoiding decompilation and compilation.

copy_predicate_clauses(From, To) :-
        head(From, MF:FromHead),
        head(To, MT:ToHead),
        FromHead =.. [_|Args],
        ToHead =.. [_|Args],
        forall(clause(MF:FromHead, Body),
               assertz(MT:ToHead, Body)).

head(From, M:Head) :-
        strip_module(From, M, Name/Arity),
        functor(Head, Name, Arity).

redefine_system_predicate(+Head)

This directive may be used both in module user and in normal modules to redefine any system predicate. If the system definition is redefined in module user, the new definition is the default definition for all sub-modules. Otherwise the redefinition is local to the module. The system definition remains in the module system.

Redefining system predicate facilitates the definition of compatibility packages. Use in other contexts is discouraged.

[ISO,nondet]retract(+Term)

When Term is an atom or a term it is unified with the first unifying fact or clause in the database. The fact or clause is removed from the database. The retract/1 predicate respects the logical update view. This implies that retract/1 succeeds for all clauses that match Term when the predicate was called. The example below illustrates that the first call to retract/1 succeeds on bee on backtracking despite the fact that bee is already retracted.^{73Example by Jan Burse}.

:- dynamic insect/1.
insect(ant).
insect(bee).

?- (   retract(insect(I)),
       writeln(I),
       retract(insect(bee)),
       fail
   ;   true
   ).
ant ;
bee.

If multiple threads start a retract on the same predicate at the same time their notion of the entry generation is adjusted such that they do not retract the same first clause. This implies that, if multiple threads use once(retract(Term)), no two threads will retract the same clause. Note that on backtracking over retract/1, multiple threads may retract the same clause as both threads respect the logical update view.

[ISO,det]retractall(+Head)

All facts or clauses in the database for which the head unifies with Head are removed. If Head refers to a predicate that is not defined, it is implicitly created as a dynamic predicate. See also dynamic/1.^{74The ISO standard only allows using dynamic/1 as a directive.}

[ISO]asserta(+Term)

[ISO]assertz(+Term)

[deprecated]assert(+Term)

Assert a clause (fact or rule) into the database. The predicate asserta/1 asserts the clause as first clause of the predicate while assertz/1 assert the clause as last clause. The deprecated assert/1 is equivalent to assertz/1. If the program space for the target module is limited (see set_module/1), asserta/1 can raise a resource_error(program_space) exception. The example below adds two facts and a rule. Note the double parentheses around the rule.

?- assertz(parent('Bob', 'Jane')).
?- assertz(female('Jane')).
?- assertz((mother(Child, Mother) :-
                parent(Child, Mother),
                female(Mother))).

asserta(+Term, -Reference)

assertz(+Term, -Reference)

[deprecated]assert(+Term, -Reference)

Equivalent to asserta/1, assertz/1, assert/1, but in addition unifies Reference with a handle to the asserted clauses. The handle can be used to access this clause with clause/3 and erase/1.

4.14.2 The recorded database

recorda(+Key, +Term, -Reference)

Assert Term in the recorded database under key Key. Key is a small integer (range min_tagged_integer ...max_tagged_integer, atom or compound term. If the key is a compound term, only the name and arity define the key. Reference is unified with an opaque handle to the record (see erase/1).

recorda(+Key, +Term)

Equivalent to recorda(Key, Term, _).

recordz(+Key, +Term, -Reference)

Equivalent to recorda/3, but puts the Term at the tail of the terms recorded under Key.

recordz(+Key, +Term)

Equivalent to recordz(Key, Term, _).

recorded(?Key, ?Value, ?Reference)

True if Value is recorded under Key and has the given database Reference. If Reference is given, this predicate is semi-deterministic. Otherwise, it must be considered non-deterministic. If neither Reference nor Key is given, the triples are generated as in the code snippet below.^{75Note that, without a given Key, some implementations return triples in the order defined by recorda/2 and recordz/2.} See also current_key/1.

        current_key(Key),
        recorded(Key, Value, Reference)

recorded(+Key, -Value)

Equivalent to recorded(Key, Value, _).

erase(+Reference)

Erase a record or clause from the database. Reference is a db-reference returned by recorda/3, recordz/3 or recorded/3, clause/3, assert/2, asserta/2 or assertz/2. Fail silently if the referenced object no longer exists. Notably, if multiple threads attempt to erase the same clause one will succeed and the others will fail.

instance(+Reference, -Term)

Unify Term with the referenced clause or database record. Unit clauses are represented as Head :- true.

4.14.3 Flags

The predicate flag/3 is the oldest way to store global non-backtrackable data in SWI-Prolog. Flags are global and shared by all threads. Their value is limited to atoms, small (64-bit) integers and floating point numbers. Flags are thread-safe. The flags described in this section must not be confused with Prolog flags described in section 2.11.

get_flag(+Key, -Value)

True when Value is the value currently associated with Key. If Key does not exist, a new flag with value `0' (zero) is created.

set_flag(+Key, Value)

Set flag Key to Value. Value must be an atom, small (64-bit) integer or float.

flag(+Key, -Old, +New)

True when Old is the current value of the flag Key and the flag has been set to New. New can be an arithmetic expression. The update is atomic. This predicate can be used to create a shared global counter as illustrated in the example below.

next_id(Id) :-
    flag(my_id, Id, Id+1).

4.14.4 Tries

Tries (also called digital tree, radix tree or prefix tree maintain a mapping between a variant of a term (see =@=/2) and a value. They have been introduced in SWI-Prolog 7.3.21 as part of the implementation of tabling. The current implementation is rather immature. In particular, the following limitations currently apply:

• Tries are not thread-safe.
• Tries should not be modified while non-deterministic predicates such as trie_gen/3 are running on the trie.
• Terms cannot have attributed variables.
• Terms cannot be cyclic. Possibly this will not change because cyclic terms can only be supported after creating a canonical form of the term.

We give the definition of these predicates for reference and debugging tabled predicates. Future versions are likely to get a more stable and safer implementation. The API to tries should not be considered stable.

trie_new(-Trie)

Create a new trie and unify Trie with a handle to the trie. The trie handle is a blob. Tries are subject to atom garbage collection.

trie_destroy(+Trie)

Destroy Trie. This removes all nodes from the trie and causes further access to Trie to raise an existence_error exception. The handle itself is reclaimed by atom garbage collection.

[semidet]is_trie(@Trie)

True when Trie is a trie object. See also current_trie/1.

[nondet]current_trie(-Trie)

True if Trie is a currently existing trie. As this enumerates and then filters all known atoms this predicate is slow and should only be used for debugging purposes. See also is_trie/1.

trie_insert(+Trie, +Key, +Value)

Insert the term Key into Trie and associate it with Value. Value can be any term. If Key-Value is already part of Trie, the predicates fails silently. If Key is in Trie associated with a different value, a permission_error is raised.

trie_update(+Trie, +Key, +Value)

As trie_insert/3, but if Key is in Trie, its associated value is updated.

trie_insert(+Trie, +Term, +Value, -Handle)

As trie_insert/3, returning a handle to the trie node. This predicate is currently unsafe as Handle is an integer used to encode a pointer. It was used to implement a pure Prolog version of the library(tabling) library.

trie_delete(+Trie, +Key, ?Value)

Delete Key from Trie if the value associated with Key unifies with Value.

trie_lookup(+Trie, +Key, -Value)

True if the term Key is in Trie and associated with Value.

trie_term(+Handle, -Term)

True when Term is a copy of the term associated with Handle. The result is undefined (including crashes) if Handle is not a handle returned by trie_insert_new/3 or the node has been removed afterwards.

[nondet]trie_gen(+Trie, ?Key, -Value)

True when Key is associated with Value in Trie. Backtracking retrieves all pairs. Currently scans the entire trie, even if Key is partly known. Currently unsafe if Trie is modified while the values are being enumerated.

[nondet]trie_property(?Trie, ?Property)

True if Trie exists with Property. Intended for debugging and statistical purposes. Retrieving some of these properties visit all nodes of the trie. Defined properties are

value_count(-Count)

Number of key-value pairs in the trie.

node_count(-Count)

Number of nodes in the trie.

size(-Bytes)

Required storage space of the trie.

hashed(-Count)

Number of nodes that use a hashed index to its children.

4.14.5 Update view

Traditionally, Prolog systems used the immediate update view: new clauses became visible to predicates backtracking over dynamic predicates immediately, and retracted clauses became invisible immediately.

Starting with SWI-Prolog 3.3.0 we adhere to the logical update view, where backtrackable predicates that enter the definition of a predicate will not see any changes (either caused by assert/1 or retract/1) to the predicate. This view is the ISO standard, the most commonly used and the most `safe'.<sup>76For example, using the immediate update view, no call to a dynamic predicate is deterministic.</sup> Logical updates are realised by keeping reference counts on predicates and generation information on clauses. Each change to the database causes an increment of the generation of the database. Each goal is tagged with the generation in which it was started. Each clause is flagged with the generation it was created in as well as the generation it was erased from. Only clauses with a `created' ... `erased' interval that encloses the generation of the current goal are considered visible.

4.14.6 Indexing databases

The indexing capabilities of SWI-Prolog are described in section 2.18. Summarizing, SWI-Prolog creates indexes for any applicable argument, but only on one argument, and does not index on arguments of compound terms. The predicates below provide building blocks to circumvent the limitations of the current indexing system.

Programs that aim at portability should consider using term_hash/2 and term_hash/4 to design their database such that indexing on constant or functor (name/arity reference) on the first argument is sufficient.

[det]term_hash(+Term, -HashKey)

If Term is a ground term (see ground/1), HashKey is unified with a positive integer value that may be used as a hash key to the value. If Term is not ground, the predicate leaves HashKey an unbound variable. Hash keys are in the range 0 ... 16,777,215, the maximal integer that can be stored efficiently on both 32 and 64 bit platforms.

This predicate may be used to build hash tables as well as to exploit argument indexing to find complex terms more quickly.

The hash key does not rely on temporary information like addresses of atoms and may be assumed constant over different invocations and versions of SWI-Prolog.^{77Last change: version 5.10.4} Hashes differ between big and little endian machines. The term_hash/2 predicate is cycle-safe.^{bugAll arguments that (indirectly) lead to a cycle have the same hash key.}

[det]term_hash(+Term, +Depth, +Range, -HashKey)

As term_hash/2, but only considers Term to the specified Depth. The top-level term has depth 1, its arguments have depth 2, etc. That is, Depth = 0 hashes nothing; Depth = 1 hashes atomic values or the functor and arity of a compound term, not its arguments; Depth = 2 also indexes the immediate arguments, etc.

HashKey is in the range [0 ...Range-1]. Range must be in the range [1 ... 2147483647]

[det]variant_sha1(+Term, -SHA1)

Compute a SHA1-hash from Term. The hash is represented as a 40-byte hexadecimal atom. Unlike term_hash/2 and friends, this predicate produces a hash key for non-ground terms. The hash is invariant over variable-renaming (see =@=/2) and constants over different invocations of Prolog.^{bugThe hash depends on word order (big/little-endian) and the wordsize (32/64 bits).}

This predicate raises an exception when trying to compute the hash on a cyclic term or attributed term. Attributed terms are not handled because subsumes_chk/2 is not considered well defined for attributed terms. Cyclic terms are not supported because this would require establishing a canonical cycle. That is, given A=[a|A] and B=[a,a|B], A and B should produce the same hash. This is not (yet) implemented.

This hash was developed for lookup of solutions to a goal stored in a table. By using a cryptographic hash, heuristic algorithms can often ignore the possibility of hash collisions and thus avoid storing the goal term itself as well as testing using =@=/2.

[det]variant_hash(+Term, -HashKey)

Similar to variant_sha1/2, but using a non-cryptographic hash and produces an integer result like term_hash/2. This version does deal with attributed variables, processing them as normal variables. This hash is primarily intended to speedup finding variant terms in a set of terms. ^{bugAs variant_sha1/2, cyclic terms result in an exception.}